2. NooK Tablet kernel

Here I’ll post 3.0 kernel log for NookTablet

Current log (for test release)

root@android:/ # dmesg<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.21+ (nook@localhost) (gcc version 4.4.3 (GCC) ) #50 SMP PREEMPT Fri Jun 1 18:09:57 EEST 2012
<4>CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>Machine: acclaim
<4>Setup machine tags finished
<4>Mashine NAME=acclaim
<6>Reserving 33554432 bytes SDRAM for VRAM
<4>Memory policy: ECC disabled, Data cache writealloc
<6>***********************
<6>OMAP4430 ES2.3 type(HS)
<6>id-code (6b95c02f)
<6>Die-id (04C80006-00000001-09110B52-17020017)
<6>Prod-id (000DB95C-000600CC)
<6>***********************
<6>SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
<7>On node 0 totalpages: 239104
<7>free_area_init_node: node 0, pgdat c06e6940, node_mem_map c083a000
<7> Normal zone: 1536 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 172032 pages, LIFO batch:31
<7> HighMem zone: 512 pages used for memmap
<7> HighMem zone: 65024 pages, LIFO batch:15
<6>PERCPU: Embedded 7 pages/cpu @c1042000 s6784 r8192 d13696 u32768
<7>pcpu-alloc: s6784 r8192 d13696 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 237056
<5>Kernel command line: androidboot.console=ttyO0 console=ttyO0,115200n8 init=/init rootwait vram=32M,82000000 omapfb.vram=0:16M@82000000 def_disp=lcd2
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 32MB 385MB 7MB 510MB = 934MB total
<5>Memory: 938752k/938752k available, 109824k reserved, 262144K highmem
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 – 0xffff1000 ( 4 kB)
<5> fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
<5> DMA : 0xffc00000 – 0xffe00000 ( 2 MB)
<5> vmalloc : 0xf0800000 – 0xf8000000 ( 120 MB)
<5> lowmem : 0xc0000000 – 0xf0000000 ( 768 MB)
<5> pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
<5> modules : 0xbf000000 – 0xbfe00000 ( 14 MB)
<5> .init : 0xc0008000 – 0xc0049000 ( 260 kB)
<5> .text : 0xc0049000 – 0xc0693000 (6440 kB)
<5> .data : 0xc0694000 – 0xc06e7440 ( 334 kB)
<5> .bss : 0xc06e7464 – 0xc0839898 (1354 kB)
<6>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:410
<4>omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Calibrating delay loop… 2007.19 BogoMIPS (lpj=7839744)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<6>L310 cache controller enabled
<6>l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
<4>CPU1: Booted secondary processor
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (4022.78 BogoMIPS).
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<3>_omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
<4>omap_hwmod: mcpdm: cannot be enabled (3)
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>GPMC revision 6.0
<6>EMIF0 is enabled with IRQ142
<6>EMIF1 is enabled with IRQ143
<6>Last reset was cold reset (PRM_RSTST=0x1)
<6>
<6>OMAP GPIO hardware version 0.1
<6>omap_mux_init: Add partition: #1: core, flags: 2
<6>omap_mux_init: Add partition: #2: wkup, flags: 2
<6>Board revision PVT
<6>Hynix DDR Memory
<6>Acclaim init charger.
<6><6>Board serial init
<3>omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
<3>omap_hwmod_mux_init: Could not allocate device mux entry
<4>omap4_sdp4430_wifi_init: start
<4>board-4430sdp.c: kxtf9_dev_init …
<4>board-4430sdp.c: kxtf9_dev_init > Init kxtf9 irq pin 66 !
<4>board-4430sdp.c: max17042_dev_init …
<4>board-4430sdp.c: max17042_dev_init > Init max17042 irq pin 65 !
<4>max17042 GPIO pin read 1
<6>sdp4430_panel_get_resource
<6>Temporary Hack for LCD PWM LED
<6>WARNING: brigthness control disabled now
<6>OMAP DMA hardware revision 0.0
<3>omap_rproc_get_pool: dsp – no carveout memory is available at all
<4>omap_rproc_get_pool: ipu – carveout memory is unavailable: 0x0, 0x0
<6>bio: create slab <bio-0> at 0
<6>print_constraints: vdd_lcd: 3300 mV normal
<7>reg-fixed-voltage reg-fixed-voltage: vdd_lcd supplying 3300000uV
<6>print_constraints: vdd_lcdtp: 3300 mV normal
<7>reg-fixed-voltage reg-fixed-voltage.0: vdd_lcdtp supplying 3300000uV
<4>i2c-core: driver [twl] using legacy suspend method
<4>i2c-core: driver [twl] using legacy resume method
<5>SCSI subsystem initialized
<7>omap2_mcspi omap2_mcspi.1: registered master spi1
<7>omap2_mcspi omap2_mcspi.2: registered master spi2
<7>omap2_mcspi omap2_mcspi.3: registered master spi3
<7>omap2_mcspi omap2_mcspi.4: registered master spi4
<7>spi spi4.0: setup: speed 375000, sample leading edge, clk normal
<7>spi spi4.0: setup mode 0, 8 bits/w, 375000 Hz max –> 0
<7>omap2_mcspi omap2_mcspi.4: registered child spi4.0
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
<4>Skipping twl internal clock init and using bootloader value (unknown osc rate)
<6>twl6030: PIH (irq 39) chaining IRQs 368..387
<6>print_constraints: VUSB: 3300 mV normal standby
<6>DCP detected
<6>twl6030_usb twl6030_usb: Initialized TWL6030 USB module
<6>print_constraints: VMMC: 1200 <–> 3000 mV at 3000 mV normal standby
<6>print_constraints: VPP: 1800 <–> 2500 mV at 1700 mV normal standby
<6>print_constraints: VUSIM: 1200 <–> 2900 mV at 1800 mV normal standby
<6>print_constraints: VCXIO: 1800 mV normal standby
<6>print_constraints: VAUX1_6030: 1000 <–> 3000 mV at 2800 mV normal standby
<6>print_constraints: VAUX2_6030: 1200 <–> 2800 mV at 1800 mV normal standby
<6>print_constraints: VAUX3_6030: 1800 mV normal standby
<6>print_constraints: VANA: 2100 mV normal standby
<6>print_constraints: CLK32KG: normal
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>omap-rproc omap-rproc.0: dsp is available
<6>omap-rproc omap-rproc.1: ipu is available
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Switching to clocksource 32k_counter
<6>Switched to NOHz mode on CPU #0
<6>Switched to NOHz mode on CPU #1
<6>musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 2.0
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>Trying to unpack rootfs image as initramfs…
<6>Freeing initrd memory: 160K
<4>omap_init_opp_table: no hwmod or odev for hsi, [18] cannot add OPPs.
<4>omap_init_opp_table: no hwmod or odev for hsi, [19] cannot add OPPs.
<6>ram_console: got buffer at a0000000, size 200000
<6>ram_console: uncorrectable error in header
<6>ram_console: no valid data in buffer (sig = 0x9b674698)
<6>console [ram-1] enabled
<6>omap-iommu omap-iommu.0: ducati registered
<6>omap-iommu omap-iommu.1: tesla registered
<4>highmem bounce pool size: 64 pages
<6>ashmem: initialized
<6>fuse init (API version 7.16)
<6>msgmni has been set to 1321
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>OMAP DSS rev 4.0
<7>boxer_disp_spi spi4.0: setup: speed 375000, sample leading edge, clk normal
<7>boxer_disp_spi spi4.0: setup mode 0, 16 bits/w, 375000 Hz max –> 0
<4>********************************************************************************
<4>****************** undefined panel, use default LGD settings ******************
<4>********************************************************************************
<6> boxer : boxer_panel_probe called , line 287
<6>dsscomp: initializing.
<7>misc dsscomp: display0=boxer_panel
<6>misc dsscomp: found 1 displays and 4 overlays, WB overlay 1
<3>could not allocate slot
<6>omap-rproc omap-rproc.1: powering up ipu
<6>virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
<6>virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
<6>console [ttyO0] enabled
<6>omap_ion_probe: adding heap secure_input of type 2 with 9c100000@80000
<6>omap_ion_probe: adding heap tiler of type 4 with 9c180000@80000
<6>brd: module loaded
<6>loop: module loaded
<6>(stk) :sysfs entries created
<6>(stk) : debugfs entries created
<6>PPP generic driver version 2.4.2
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usblp
<6>usbcore: registered new interface driver uas
<6>Initializing USB Mass Storage driver…
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for FTDI USB Serial Device
<6>usbcore: registered new interface driver ftdi_sio
<6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc: MUSB HDRC host driver
<6>musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input1
<6>ft5x06_probe() – FT5x06 found on I2C bus.
<6>input: ft5x06-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0038/input/input2
<6>ft5x06_initialize() – sysfs_create_group() succeeded.
<4>i2c-core: driver [ft5x06-i2c] using legacy suspend method
<4>i2c-core: driver [ft5x06-i2c] using legacy resume method
<6>twl6030_pwrbutton_probe: Enter
<6>input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input3
<6>kxtf9 1-000f: WHO_AM_I = 0x01
<6>input: kxtf9_accel as /devices/virtual/input/input4
<6>using rtc device, twl_rtc, for alarms
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>i2c /dev entries driver
<6>Linux video capture interface: v2.00
<6>dmm: probe base: fd300000, irq 145
<6>max17042 1-0036: Version = 0x0092
<6>max17042 1-0036: support ver. 1.0.0 enabled
<4>i2c-core: driver [max17042] using legacy suspend method
<4>i2c-core: driver [max17042] using legacy resume method
<4>MAX8903: Charger registering!
<4>MAX8903: Charger Initializing…
<4>MAX8903: Request CHARGER FLT IRQ successfully!
<4>MAX8903: Charger detected at boot = 3
<6>OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>logger: created 256K log ‘log_main’
<6>logger: created 256K log ‘log_events’
<6>logger: created 256K log ‘log_radio’
<6>logger: created 256K log ‘log_system’
<3>No CPUfreq policy at this point.
<6>OMAP4 EVT SoC init
<6>Use ABE support
<6>mmc0: new high speed DDR MMC card at address 0001
<6>mmcblk0: mmc0:0001 SEM16G 14.8 GiB
<6>mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
<6>mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
<4>Alternate GPT is invalid, using primary GPT.
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
<6> mmcblk0boot1: unknown partition table
<6> mmcblk0boot0: unknown partition table
<6>entered the omap4_aic31xx_init function….
<3>tlv320aic3110-codec tlv320aic3110-codec: dapm: unknown pin Headset Stereophone
<3>tlv320aic3110-codec tlv320aic3110-codec: dapm: unknown pin Headset Mic
<6> codec is not null
<6>headset not connected
<6>input: OMAP4_ACCLAIM-ABE Headset Jack as /devices/platform/soc-audio/sound/card0/input5
<6>OMAP4 EVT Soc Init success..
<6>ALSA device list:
<6> #0: OMAP4_NOOKTABLET_AIC3110-ABE
<6>GACT probability NOT on
<6>Mirror/redirect action on
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (14670 buckets, 58680 max)
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>xt_time: kernel timezone is -0000
<6>IPv4 over IPv4 tunneling driver
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>NET: Registered protocol family 10
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<6>L2TP core driver, V2.0
<6>PPPoL2TP kernel driver, V2.0
<6>NET: Registered protocol family 35
<6>lib80211: common routines for IEEE802.11 drivers
<7>lib80211_crypt: registered algorithm ‘NULL’
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>ThumbEE CPU extension supported.
<5>Registering SWP/SWPB emulation handler
<6>Reprogramming LPDDR2 timings to 400000000 Hz
<4>sr_init: No PMIC hook to init smartreflex
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
<3>Power Management for TI OMAP4.
<6>OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.
<6>OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.
<6>cannot apply mgr(lcd) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6>cannot apply mgr(tv) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6>cannot apply mgr(lcd2) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6> boxer : boxer_panel_enable called , line 358
<6> boxer : boxer_panel_start called , line 301
<6>PLL init
<4>Fixed voltage enable GPIO = 121
<6> omapdss_dpi_display_enable == 0
<6>regulator_init_complete: VANA: disabling
<6>twl_rtc twl_rtc: setting system clock to 2012-06-04 03:53:00 UTC (1338781980)
<6>Freeing init memory: 260K
<3>init: could not import file /system/etc/init.local.rc
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>mmc1: host does not support reading read-only switch. assuming write-enable.
<6>mmc1: new high speed SDHC card at address b368
<6>mmcblk1: mmc1:b368 USD 7.46 GiB
<4>********************************************************************************
<6> mmcblk1: p1
<4>wl12xx_set_power: 1
<4>****************** undefined panel, use default LGD settings ******************
<4>********************************************************************************
<4>mmc2: card claims to support voltages below the defined range. These will be ignored.
<4>mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
<6>mmc2: new SDIO card at address 0001
<6>EXT4-fs (mmcblk0p8): INFO: recovery required on readonly filesystem
<4>wl12xx_set_power: 0
<6>EXT4-fs (mmcblk0p8): write access will be enabled during recovery
<6>EXT4-fs (mmcblk0p8): recovery complete
<6>EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: errors=panic
<6>EXT4-fs (mmcblk0p9): recovery complete
<6>EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: errors=panic
<6>Backlight set power, on_off = 1
<6>Backlight set power end
<6>NookTablet LCD enable!
<6>omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5841740
<6>omap-rproc omap-rproc.1: BIOS image version is 2
<6>rproc_handle_resources: RSC_CARVEOUT handle_resources, name == IPU_MEM_IPC_VRING
<6>rproc_handle_resources: RSC_CARVEOUT handle_resources, name == IPU_MEM_IPC_DATA
<6>rproc_handle_resources: RSC_CARVEOUT handle_resources, name == IPU_MEM_TEXT
<6>rproc_handle_resources: RSC_CARVEOUT handle_resources, name == IPU_MEM_DATA
<6>rproc_handle_resources: RSC_CARVEOUT handle_resources, name == IPU_MEM_IOBUFS
<4>omap_hwmod: ipu: failed to hardreset
<6>omap-rproc omap-rproc.1: remote processor ipu is now up
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
<6>rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1025 -> 60!
<4>MAX8903: Charging is now enabled!
<4>MAX8903: AC Charging at 1900 mA
<7>EXT4-fs (mmcblk0p11): ext4_orphan_cleanup: deleting unreferenced inode 375382
<6>EXT4-fs (mmcblk0p11): 1 orphan inode deleted
<6>EXT4-fs (mmcblk0p11): recovery complete
<6>EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=panic
<6>PVR: PVRCore_Init
<6>PVR: PVRSRVDriverProbe(pDevice=ef8ab600)
<6>PVR: SGX register base: 0x56000000
<6>PVR: SGX register size: 65535
<6>PVR: SGX IRQ: 53
<6>PVR: EnableSystemClocks: Enabling System Clocks
<6>PVR: PVRCore_Init: major device 247
<6>omaplfbOMAPLFBInit: Blitsville gc2d not present, blits disabled
<7>omaplfb: OMAPLFBInitIonOmap: Device 0: Requesting 2 TILER 2D framebuffers
<6>Compat-wireless backport release:
<6>Backport based on wl12xx.git v3.1-rc6-14178-gfb320e3
<6>PVR: Installing MISR with cookie bf0387f8
<6>PVR: Installing device LISR SGX ISR on IRQ 53 with cookie ef0f0700
<6>PVR: OSUnMapPhysToLin: unmapping 65535 bytes from f0be0000
<6>PVR: SysFinalise: Version string: SGX revision = 1.2.0
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
<6>EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
<6>wl12xx: driver version:
<6>wl12xx: compilation time: Thu May 10 20:35:17 2012
<3>android_usb: already disabled
<3>android_usb: already disabled
<6>mtp_bind_config
<6>adb_bind_config
<6>adb_open
<6> boxer : boxer_panel_suspend called , line 381
<6> boxer : boxer_panel_stop called , line 324
<6>Backlight set power, on_off = 0
<6>Backlight set power end
<6>NookTablet LCD disable!
<4>misc dsscomp: [ef21f000] ignoring set failure -22
<4>Fixed voltage disable GPIO = 121
<4>Fixed voltage disable GPIO = 36
<6>adb_release
<6>adb_open
<6>mtp_bind_config
<6>adb_bind_config
<6>adb_release
<3>ft5x06_xy_worker() – ERROR: Could not read from the Touch Panel registers.
<6> boxer : boxer_panel_resume called , line 391
<6> boxer : boxer_panel_start called , line 301
<6>PLL init
<4>Fixed voltage enable GPIO = 121
<6> omapdss_dpi_display_enable == 0
<4>Fixed voltage enable GPIO = 36
<4>********************************************************************************
<4>****************** undefined panel, use default LGD settings ******************
<4>********************************************************************************
<6>Backlight set power, on_off = 1
<6>mtp_bind_config
<6>adb_bind_config
<6>Backlight set power end
<6>NookTablet LCD enable!
<6>warning: `zygote’ uses 32-bit capabilities (legacy support in use)
<6>adb_open
<6>request_suspend_state: wakeup (3->0) at 29128540041 (2012-06-04 03:53:25.349914551 UTC)
<6>kxtf9 1-000f: IRQ TILT [1]
<4>wl12xx_set_power: 1
<6>acc_open
<6>acc_release
<4>wl12xx_set_power: 0
<7>cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2402000 KHz – 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2457000 KHz – 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2457000 KHz – 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 2474000 KHz – 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Disabling freq 5035 MHz
<7>cfg80211: Disabling freq 5040 MHz
<7>cfg80211: Disabling freq 5045 MHz
<7>cfg80211: Disabling freq 5055 MHz
<7>cfg80211: Disabling freq 5060 MHz
<7>cfg80211: Disabling freq 5080 MHz
<7>cfg80211: Disabling freq 5170 MHz
<7>cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5170000 KHz – 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Disabling freq 5260 MHz
<7>cfg80211: Disabling freq 5280 MHz
<7>cfg80211: Disabling freq 5300 MHz
<7>cfg80211: Disabling freq 5320 MHz
<7>cfg80211: Disabling freq 5500 MHz
<7>cfg80211: Disabling freq 5520 MHz
<7>cfg80211: Disabling freq 5540 MHz
<7>cfg80211: Disabling freq 5560 MHz
<7>cfg80211: Disabling freq 5580 MHz
<7>cfg80211: Disabling freq 5600 MHz
<7>cfg80211: Disabling freq 5620 MHz
<7>cfg80211: Disabling freq 5640 MHz
<7>cfg80211: Disabling freq 5660 MHz
<7>cfg80211: Disabling freq 5680 MHz
<7>cfg80211: Disabling freq 5700 MHz
<7>cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<7>cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
<7>cfg80211: 5735000 KHz – 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
<6>wl12xx: loaded
<6>wl12xx: open_count=0, add=1, current_fw=0
<6>wl12xx: state: 0
<4>wl12xx_set_power: 1
<6>wl12xx: firmware booted (Rev 6.3.7.0.105)
<7>ieee80211 phy0: device now idle
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<3>init: sys_prop: permission denied uid:1010 name:wifi.wpa_supp_ready
<7>ieee80211 phy0: device no longer idle – working
<7>wlan0: authenticate with 90:f6:52:2d:4e:a4 (try 1)
<7>wlan0: authenticated
<7>ieee80211 phy0: device now idle
<7>ieee80211 phy0: Allocated STA 90:f6:52:2d:4e:a4
<7>ieee80211 phy0: Inserted dummy STA 90:f6:52:2d:4e:a4
<7>ieee80211 phy0: device no longer idle – working
<7>wlan0: associate with 90:f6:52:2d:4e:a4 (try 1)
<7>wlan0: RX AssocResp from 90:f6:52:2d:4e:a4 (capab=0x431 status=0 aid=1)
<7>wlan0: associated
<7>wlan0: moving STA 90:f6:52:2d:4e:a4 to state 1
<7>wlan0: moving STA 90:f6:52:2d:4e:a4 to state 2
<7>wlan0: No basic rates in AssocResp. Using min supported rate instead.
<7>ieee80211 phy0: Inserted STA 90:f6:52:2d:4e:a4
<7>ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
<7>ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
<7>ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
<7>ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
<6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>cfg80211: Pending regulatory request, waiting for it to be processed…
<7>wlan0: dropped frame to 90:f6:52:2d:4e:a4 (unauthorized port)
<6>wl12xx: Association completed.
<7>wlan0: moving STA 90:f6:52:2d:4e:a4 to state 3
<6>binder: send failed reply for transaction 8043 to 894:911
<7>wlan0: no IPv6 routers present
<3> tlv320aic3110 Media1 LP: no BE found for PDM_DL2
<4>MAX8903: Charging is now disabled!
<4>MAX8903: Charger Unplugged!
<6>PC detected
<6>android_work: sent uevent USB_STATE=CONNECTED
<6>android_work: sent uevent USB_STATE=DISCONNECTED
<6>android_work: sent uevent USB_STATE=CONNECTED
<6>android_usb gadget: high speed config #1: android
<6>android_work: sent uevent USB_STATE=CONFIGURED
<4>MAX8903: Charging is now enabled!
<4>MAX8903: USB Charging at 500 mA
<6>mtp_open
<6>
<7>ieee80211 phy0: device no longer idle – scanning
<7>ieee80211 phy0: device now idle

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s